[Partially SOLVED] ERROR at GMR in setting up esp8266

IoT Devices
,
1

i am sending dht11 sensor data to ubidots , this is my code

#include <UbidotsESP8266.h>
 #include <SoftwareSerial.h> 
 #include <dht.h>
 #define DHT11_PIN 5
dht DHT;

 #define SSID "shubham"
 #define PASS "qwertyuiop"

 #define TOKEN "i0qJjjaZAZmTQ68hWKH7TYzWaLkk1U"
 #define ID "573c03747625424a37095aef"

Ubidots client(TOKEN);

void setup() {
  Serial.begin(115200);
  client.wifiConnection(SSID,PASS);
}

void loop() {
  int chk = DHT.read11(DHT11_PIN);
 int value= DHT.humidity;
  client.add(ID,value);
  client.sendAll();
}

i am getting error likethis on my serial monitor :-

Response of ESP8266:

clearin data
Response of ESP8266:

Reset of ESP8266
Response of ESP8266:

Error at GMR
Response of ESP8266:

Response of ESP8266:

Response of ESP8266:

Response of ESP8266:

Response of ESP8266:

Response of ESP8266:

Error at CIPMODE
Response of ESP8266:

can anyone please help me what to do?

2

hello!
What library are you using? and this code is correct? because you have your includes empty

3

Are you correct your issue on Dht11?

4

same problem for me

6

Hey @faizmca17!
How are you?
could you try something?
Try to disconnect VCC of ESP and connect it againt, when the Arduino is reseting!

Best regards,
Metavix

7

From my experience, I think it is because of baud rate mismatch. your esp module still using 115200 while UbidotsESP8266.h is using baud rate 9600.

1 Like
8

I Have the same problem using the same code that you give us to test it , (obviously I changed the token ssid, and password) https://ubidots.com/docs/devices/ESP8266-arduino.html#send-one-value-to-ubidots. and send me the problem

Response of ESP8266:
clearin data
Response of ESP8266:
Reset of ESP8266
Response of ESP8266:
Error at GMR
Response of ESP8266:
Error at CIPMODE

9

Change pin rx to tx and do a test again please

10

@nugrahadi you are right some ESP8266 has different Baud rate, i will implement a different client declaration in the library to fix that.

11

The error is the same.

12

Yeah the reason is the baud rate that was implemented in the library i will a change that as soon as posible.

Best regards,
Metavix

13

Even I am getting the same error.I am using ESP8266 wifi shield and it works with the baudrate 9600 but still I could solve that error at GMR.Could anyone please help me out?

14

Hello @bhargavi,

Sorry for the time in hold! We’re working on our libraries, also making some guides to help you to solve this problem. I hope finish it as soon is possible!

Best Regards,
Maria C.