Ubidots
Building management software development

Custom building management software, from plant room to portfolio

You own the application; we keep everything underneath it running. We build the portfolio view, alerts and energy reporting your facility teams rely on — for HVAC, air quality, meters and alarms, over the BMS you already have — on a platform already in production.

Why it is faster

A development shop starts with an empty repository. We start with a platform in production.

Most of a building management application has nothing to do with buildings. It is ingestion, storage, logins and alerting — and whoever builds it has to maintain it forever.

Building from scratch You pay for all of it

Before anyone builds the portfolio view you asked for, a team builds — and then maintains — the whole stack underneath it.

Building on Ubidots You pay for the top

The work begins at your data model and your interface, because everything below that line already exists and is under support.

Reporting and alerting already running
Authentication, users and roles already running
Time-series storage already running
Device ingestion and protocols already running
Security, uptime and upgrades our job
What we build for buildings

Custom software for every building you look after

Every project starts from a list — a handful of screens, a calculation, an integration. These are the ones facility teams and BMS integrators bring us most.

Portfolio view across every building

Every building in one place, whatever brand of BMS each one runs, with alarms ranked across sites and buildings compared on the numbers your team is measured on.

  • One view across BMS brands
  • Alarms ranked across sites
  • Building-to-building comparisons

HVAC and plant monitoring

Chillers, boilers, air handlers and pumps: runtime, setpoint against actual, and faults, with alerts when equipment runs out of hours or fights its own schedule.

  • Equipment runtime and status
  • Setpoint against actual
  • Out-of-hours running

Building energy management

Main and submeters per building, compared with a baseline and normalised per square metre, so out-of-hours use and drift show up the week they start, not at year end.

  • Energy per building and per m²
  • Baselines and out-of-hours use
  • Utility bills against meters

Indoor air quality and comfort

CO₂, particulates, VOCs, temperature and humidity per zone, with comfort hours per floor and screens for lobbies and tenants who want to see the air they breathe.

  • CO₂, particulates and VOCs per zone
  • Comfort hours per floor
  • Lobby and tenant screens

Leaks, critical rooms and life-safety equipment

Leak sensors under risers and plant, server and electrical room conditions, and the status of fire pumps and generators, so problems are found by an alert and not by a tenant.

  • Leak and flood alerts
  • Server and electrical room conditions
  • Fire pump and generator status

Industrial AI for facility teams

Agents that keep an eye on every building, write the Monday portfolio summary and answer questions like “which buildings ran HVAC out of hours this week?” through Channels like WhatsApp.

  • Weekly portfolio summaries
  • Questions answered from live data
  • Actions through Connectors
Connectivity

Connect every building, whatever runs it

Most buildings already have a BMS, meters and a plant room full of controllers. We bring that data across, and add sensors where there's nothing to read. Hardware is specified, not supplied.

BMS

The systems already there

BMS and plant controllers read on site by an edge gateway over BACnet or Modbus, then published to the platform.

WIRELESS

Sensors without cabling

Battery-powered air quality, leak and temperature sensors over LoRaWAN, added to occupied buildings without opening ceilings.

METERS

Main and submeters

Electricity, gas, water and heat meters, read over Modbus or pulled from the utility's data.

SYSTEMS

Maintenance and occupancy

Work orders, maintenance and occupancy systems, connected by API or webhook and scoped as their own work package.

Connectivity:BACnet via gatewayModbus via gatewayLoRaWANMQTTHTTP / RESTWebhooks
You own it. We run it.

Completely custom, without a maintenance backlog

A platform you build yourself is worth the most on the day it ships. After that, someone owns its uptime, its security patches and every dependency in it — permanently.

Here, everything above the line is yours: the data model, the screens, the brand. Everything below it is ours to run, under support, and it keeps improving underneath you without landing on your roadmap.

Where a custom application is the deliverable, the code is written as work for hire. You own the repository and have access to it throughout the build, not at the end.

How an engagement runs

Five stages, and the number gets tighter at every one

Nobody can price a conversation accurately. So we tell you how wide the estimate is at each stage, and narrow it by doing work rather than by guessing harder.

Qualification

A short call to capture scope and sizing, and to put an indicative range on the work.

±100%

Specification

Your requirements document — or a fixed-fee, timeboxed discovery that produces one.

±50%

Estimation

Every requirement mapped to a work package, each one sized. A range we can defend line by line.

±50%

Prototype

Something you can use on the real platform before the build is committed. Then re-estimated.

±25%

Build

Agreed scope, stated exclusions, delivered in reviewable increments with monthly effort reporting.

Fixed scope

Discovery, when you need one, is a fixed fee credited in full against the project that follows. Build phases run under a not-to-exceed ceiling you set: work stops for your approval at the ceiling rather than running past it.

On the role of AI

AI compresses the build. Engineers still own the quality.

It would be easy to overclaim here, so plainly: AI-assisted development compresses the build step, which is the part that used to dominate a quote.

It does not compress the senior specification in front of it, or the code review and QA after it. Those are why the result is maintainable, they are done by engineers, and they sit inside the same rate.

Spec
Build — AI-compressed
Review
QA
15%45%15%25%

Typical effort split of a custom build. The cyan block is where the time goes away; the rest is the human quality floor.

In the field

What this looks like in practice

One building integrator running its clients on the platform today, and one indoor-air platform our team is building.

Building technology integrator · commercial buildings

Energy and solar for every building, on a screen in the lobby

An electrical and automation contractor in Northern Europe monitors energy, rooftop solar and battery storage for the buildings it looks after — grocery stores, a car dealership and a municipal care home — under its own brand.

12client organisations
31dashboards, including lobby screens

PLCs in each building read inverters, batteries and utility meters over Modbus. Derived variables turn them into self-consumption, cost at the hourly price and CO₂ avoided, shown on public screens in the buildings' lobbies in terms visitors understand.

Built and run by the integrator on the Ubidots platform since 2020. Not a build by our development team.

Equipment manufacturer · white-label platform

An indoor air quality manufacturer building its own platform

They arrived with a finished requirements document and one real question: not "can you build this", but "how much of this do we have to build at all?"

220requirements classified
89.5%deliverable on the platform
~25work packages

145 requirements ship through configuration and 52 through the extension layer. A working prototype was built on the real platform, not in a design tool, and became a delivery asset in its own right.

Enterprise white-label licence closed August 2026 · delivery under way

FAQ

Questions facility teams ask first

What is a building management system?

A building management system (BMS) is the control system that runs a building's heating, cooling, ventilation, lighting and plant. It keeps one building running; it rarely gives a facility team a clear view across several buildings, energy, air quality and alarms at once. Custom software adds that layer on top, fitted to your portfolio and the way your team works.

Does it replace our BMS?

No. The BMS keeps controlling the building. This layer reads from it — and from meters and sensors it doesn't reach — and puts every building, whatever brand of BMS it has, in one place for the people who manage the portfolio. It monitors, alerts and reports; control stays with the BMS.

Do you support BACnet?

Through an edge gateway. The gateway reads BACnet or Modbus from the BMS and plant controllers on site and publishes the points to the platform over MQTT or HTTP; the platform itself doesn't speak BACnet. We specify the gateway and which points to bring across.

Why is building on Ubidots faster than building from scratch?

Because the work starts at your data model and your interface, not at an empty repository. Ingestion, time-series storage, authentication, roles, alerting and reporting already exist and are in production. AI-assisted development then compresses the build step itself, while specification, code review and QA stay with senior engineers.

Can BMS integrators and facility service companies deliver it under their own brand?

Yes. Each client, portfolio or building gets its own organisation, users and roles, and the application carries your brand on the web and on mobile. Your team sees every client; each client sees only its own buildings.

Who maintains the software after it is delivered?

The infrastructure underneath your application — ingestion, storage, orchestration, security, availability and upgrades — is run and maintained by Ubidots under your platform subscription. You own the application layer. Changes to it after delivery are scoped as new work, the same way the original build was.

Do we own the code?

On engagements where a custom application is the deliverable, the code is written as work for hire: you own the repository and the source, with access throughout the build rather than at the end. The platform underneath stays Ubidots'.

How much does custom building management software cost?

It depends on scope, and an honest first answer is a range rather than a number. We give that range on the first call, then narrow it at each stage: specification, work-package estimate, and a prototype you can use before the full build is committed. Discovery, when you need one, is a fixed fee credited against the project.

Do we need a Ubidots subscription?

Yes. The application runs on the Ubidots platform, and the subscription is scoped and quoted separately from the development work. Development is not part of a subscription, and a subscription is not part of a development engagement.

Start with one message

Tell us which buildings you need to see in one place

Tell us what you need. We'll get back to you to work out whether there's a project here, and put a range on it that's honest about how wide it still is.

Get in Touch

Get in Touch

Get the best of our product and team

Main IoT verticals (select up to 3)