Ubidots
Environmental monitoring software development

Custom environmental monitoring software, from field to report

You own the application; we keep everything underneath it running. We build the monitoring, alerts and reports your environmental teams and clients rely on — for air, water, groundwater, noise and emissions — on a platform already in production.

Why it is faster

A development shop starts with an empty repository. We start with a platform in production.

Most of an environmental monitoring application has nothing to do with the environment. It is ingestion, storage, logins, alerting and the reports your clients ask for — and whoever builds it has to maintain it forever.

Building from scratch You pay for all of it

Before anyone builds the site report you asked for, a team builds — and then maintains — the whole stack underneath it.

Building on Ubidots You pay for the top

The work begins at your data model and your interface, because everything below that line already exists and is under support.

Reporting and alerting already running
Authentication, users and roles already running
Time-series storage already running
Device ingestion and protocols already running
Security, uptime and upgrades our job
What we build for environmental teams

Custom software for every station, well and site

Every project starts from a list — a handful of screens, a calculation, an integration. These are the ones environmental consultancies and operators bring us most.

Air quality and dust monitoring

Particulates and gases at site boundaries and in nearby communities, with triggers on rolling averages and wind direction next to the readings, so an exceedance comes with its likely source.

  • Particulates and gases per station
  • Triggers on rolling averages
  • Wind direction alongside readings

Water quality monitoring

Rivers, lakes, ponds and discharge points measured continuously, with sampling events and lab results on the same timeline as the sondes.

  • pH, dissolved oxygen, turbidity, conductivity
  • Discharge point monitoring
  • Sampling events next to sensor data

Groundwater and monitoring wells

Level and conductivity loggers in every well, with manual dips and lab results loaded alongside, so each well has one history instead of a logger file and a spreadsheet.

  • Level and conductivity per well
  • Manual dips and lab results by file or API
  • Trends per well and per site

Noise and vibration at site boundaries

Noise and ground vibration from construction, mining and industrial sites, measured against limits that change with the time of day, and summarised per site each month.

  • Noise levels per location
  • Limits by time of day
  • Monthly summaries per site

Emissions and process monitoring

Readings from stack analysers and process instruments, through an edge gateway, with rolling averages against your limits and exports for the reports you prepare.

  • Analyser readings through a gateway
  • Rolling averages against limits
  • Data exports for reporting

Industrial AI across your environmental data

Agents that keep an eye on every station, write the daily summary per site and answer questions like “which stations went over their trigger this week?” through Channels like WhatsApp.

  • Daily summaries per site
  • Questions answered from live data
  • Actions through Connectors
Connectivity

Connect every station, logger and lab

Environmental data comes from remote stations, loggers in the ground, analysers on a stack and results from a lab. We work with what your sites already have, or specify what they need. Hardware is specified, not supplied.

FIELD STATIONS

Remote and solar-powered

Air, weather and water stations reporting over cellular (LTE-M, NB-IoT or 4G) from sites with no network.

LOGGERS

Loggers and sondes

Data loggers and sondes in wells and water bodies, over LoRaWAN or cellular, or through the logger maker's cloud.

ANALYSERS

Stack and process instruments

Emission analysers and process instruments read through an edge gateway over Modbus or MQTT.

LAB & GIS

Lab results, maps and weather

Lab results, GIS layers and weather data, loaded by file or API and scoped as their own work package.

Connectivity:LTE-M / NB-IoTLoRaWANMQTTHTTP / RESTModbus via gatewayFile import via API
You own it. We run it.

Completely custom, without a maintenance backlog

A platform you build yourself is worth the most on the day it ships. After that, someone owns its uptime, its security patches and every dependency in it — permanently.

Here, everything above the line is yours: the data model, the screens, the brand. Everything below it is ours to run, under support, and it keeps improving underneath you without landing on your roadmap.

Where a custom application is the deliverable, the code is written as work for hire. You own the repository and have access to it throughout the build, not at the end.

How an engagement runs

Five stages, and the number gets tighter at every one

Nobody can price a conversation accurately. So we tell you how wide the estimate is at each stage, and narrow it by doing work rather than by guessing harder.

Qualification

A short call to capture scope and sizing, and to put an indicative range on the work.

±100%

Specification

Your requirements document — or a fixed-fee, timeboxed discovery that produces one.

±50%

Estimation

Every requirement mapped to a work package, each one sized. A range we can defend line by line.

±50%

Prototype

Something you can use on the real platform before the build is committed. Then re-estimated.

±25%

Build

Agreed scope, stated exclusions, delivered in reviewable increments with monthly effort reporting.

Fixed scope

Discovery, when you need one, is a fixed fee credited in full against the project that follows. Build phases run under a not-to-exceed ceiling you set: work stops for your approval at the ceiling rather than running past it.

On the role of AI

AI compresses the build. Engineers still own the quality.

It would be easy to overclaim here, so plainly: AI-assisted development compresses the build step, which is the part that used to dominate a quote.

It does not compress the senior specification in front of it, or the code review and QA after it. Those are why the result is maintainable, they are done by engineers, and they sit inside the same rate.

Spec
Build — AI-compressed
Review
QA
15%45%15%25%

Typical effort split of a custom build. The cyan block is where the time goes away; the rest is the human quality floor.

In the field

What this looks like in practice

Two environmental businesses running their clients' deployments on the platform today.

Environmental monitoring distributor · client deployments

A distributor that delivers its clients' monitoring data under its own name

An environmental monitoring distributor in the Asia-Pacific region supplies samplers, sensors and integrated systems from dozens of manufacturers, and delivers the data from its clients' sites through its own application.

898devices
2020on Ubidots since

Instruments from different suppliers report into one platform, where derived variables turn raw readings into the values clients actually monitor. A new client project of about 400 devices, each with more than 30 variables, is being scoped on the same account.

Built and run by the distributor on the Ubidots platform. Not a build by our development team.

Sustainability consultancy · plant utilities

Utility costs made visible, machine by machine

Quantify Environmental, a consultancy in Guelph, Ontario, instruments manufacturing, food and beverage, plastics and pharmaceutical plants whose utility bills arrived once a month as a single number, often from analogue meters.

$250K+annual savings identified for clients
3utilities: electricity, water, gas

Non-invasive, battery-powered wireless sensors feed one white-labelled application on the Ubidots platform, where derived variables turn raw readings into consumption per process and shift, from a night shift's water use to six months of trends.

Built by Quantify Environmental, a Ubidots customer, on the Ubidots platform; published as a case study on the Ubidots blog. Not a build by our development team.

FAQ

Questions environmental teams ask first

What is environmental monitoring?

Environmental monitoring is measuring the condition of air, water, soil and groundwater — and the noise, dust and emissions an operation produces — over time, so changes are caught early and there is a record of what happened. Custom software fits it to your sites, your sensors and loggers, and the reports your clients and regulators expect.

Why is building on Ubidots faster than building from scratch?

Because the work starts at your data model and your interface, not at an empty repository. Ingestion, time-series storage, authentication, roles, alerting and reporting already exist and are in production. AI-assisted development then compresses the build step itself, while specification, code review and QA stay with senior engineers.

Does it handle manual readings and lab results, not only sensors?

Yes. Field readings, sampling events and lab results can be loaded by file or API and sit on the same timeline as the continuous sensor data, so a well or a discharge point has one history instead of a spreadsheet next to a dashboard.

Does it produce our regulatory reports?

It produces the records and exports those reports are built from: timestamped readings, exceedance alerts, who acknowledged them, and scheduled summaries per site. What goes to a regulator, and whether a site meets its permit, stays with you or your consultant; no software decides that on its own.

Can a consultancy or distributor deliver it to clients under its own brand?

Yes. Each client or site gets its own organisation, users and roles, and the application carries your brand on the web and on mobile. Your team sees every client; each client sees only its own sites.

Who maintains the software after it is delivered?

The infrastructure underneath your application — ingestion, storage, orchestration, security, availability and upgrades — is run and maintained by Ubidots under your platform subscription. You own the application layer. Changes to it after delivery are scoped as new work, the same way the original build was.

Do we own the code?

On engagements where a custom application is the deliverable, the code is written as work for hire: you own the repository and the source, with access throughout the build rather than at the end. The platform underneath stays Ubidots'.

How much does custom environmental monitoring software cost?

It depends on scope, and an honest first answer is a range rather than a number. We give that range on the first call, then narrow it at each stage: specification, work-package estimate, and a prototype you can use before the full build is committed. Discovery, when you need one, is a fixed fee credited against the project.

Do we need a Ubidots subscription?

Yes. The application runs on the Ubidots platform, and the subscription is scoped and quoted separately from the development work. Development is not part of a subscription, and a subscription is not part of a development engagement.

Start with one message

Tell us what you measure, where, and who needs to see it

Tell us what you need. We'll get back to you to work out whether there's a project here, and put a range on it that's honest about how wide it still is.

Get in Touch

Get in Touch

Get the best of our product and team

Main IoT verticals (select up to 3)