Ubidots
Healthcare software development

Custom healthcare software, from pharmacy to operating room

You own the application; we keep everything underneath it running. We build the monitoring, alerts and records your biomedical, pharmacy and facilities teams rely on — for medicines, cleanrooms, medical gases and equipment — on a platform already in production.

Why it is faster

A development shop starts with an empty repository. We start with a platform in production.

Most of a healthcare monitoring application has nothing to do with healthcare. It is ingestion, storage, logins, alerting and the records inspectors ask for — and whoever builds it has to maintain it forever.

Building from scratch You pay for all of it

Before anyone builds the pharmacy report you asked for, a team builds — and then maintains — the whole stack underneath it.

Building on Ubidots You pay for the top

The work begins at your data model and your interface, because everything below that line already exists and is under support.

Reporting and alerting already running
Authentication, users and roles already running
Time-series storage already running
Device ingestion and protocols already running
Security, uptime and upgrades our job
What we build for healthcare

Custom software for everything a hospital depends on

Every project starts from a list — a handful of screens, a calculation, an integration. These are the ones hospitals, labs and medical equipment companies bring us most.

Medication, vaccine and blood cold chain

Pharmacy fridges and freezers, blood bank units, platelet agitators and transport coolers, with min/max tracking and alerts that reach the person responsible for each unit.

  • Min/max per unit
  • Excursion alerts with acknowledgement
  • Exportable temperature records

Cleanrooms and pressure-controlled rooms

Differential pressure, temperature and humidity in compounding pharmacies, isolation rooms and operating rooms, with door events next to the readings so a drop has an explanation.

  • Differential pressure per room
  • Temperature and humidity
  • Door events alongside pressure

Medical gases and plant rooms

Medical air plants, oxygen and gas tanks and the rooms that house them: levels, dew point and carbon monoxide, with alarms to biomedical engineering rather than to whoever walks past.

  • Tank levels
  • Dew point and CO in medical air
  • Alarms to biomedical engineering

Medical equipment and imaging rooms

Equipment status and usage, and the room conditions imaging and sterilisation equipment need, for hospitals and for the companies that sell and service the equipment.

  • Equipment status and usage
  • Room conditions for imaging
  • Service history per unit

Records and reports for inspections

Scheduled reports per area, every sensor's calibration data and who acknowledged each alert, kept as records your team can show an inspector instead of assembling them by hand.

  • Scheduled reports per area
  • Calibration data per sensor
  • Who acknowledged each alert

Industrial AI across your facilities data

Agents that keep an eye on every unit and room, summarise the night's excursions per area and answer questions like “which fridges had an excursion this month?” through Channels like WhatsApp.

  • Morning summaries per area
  • Questions answered from live data
  • Actions through Connectors
Connectivity

Connect every fridge, room and plant

Hospitals are dense buildings with strict IT rules. We work with what your institution already allows, or specify what it needs. Hardware is specified, not supplied.

WIRELESS

Sensors in every area

Battery-powered temperature, humidity, pressure and door sensors over LoRaWAN or Wi-Fi, with no cabling through clinical areas.

PLANT ROOMS

Gas plants and controllers

Medical air plants, tanks and room controllers, read through an edge gateway over Modbus or MQTT.

EQUIPMENT

Connected equipment

Equipment with a data port or a vendor cloud, read through a gateway or API where the manufacturer allows it.

SYSTEMS

Maintenance and quality systems

Your maintenance, quality or ERP software, connected by API or webhook and scoped as its own work package.

Connectivity:LoRaWANWi-FiMQTTHTTP / RESTModbus via gatewayWebhooks
You own it. We run it.

Completely custom, without a maintenance backlog

A platform you build yourself is worth the most on the day it ships. After that, someone owns its uptime, its security patches and every dependency in it — permanently.

Here, everything above the line is yours: the data model, the screens, the brand. Everything below it is ours to run, under support, and it keeps improving underneath you without landing on your roadmap.

Where a custom application is the deliverable, the code is written as work for hire. You own the repository and have access to it throughout the build, not at the end.

How an engagement runs

Five stages, and the number gets tighter at every one

Nobody can price a conversation accurately. So we tell you how wide the estimate is at each stage, and narrow it by doing work rather than by guessing harder.

Qualification

A short call to capture scope and sizing, and to put an indicative range on the work.

±100%

Specification

Your requirements document — or a fixed-fee, timeboxed discovery that produces one.

±50%

Estimation

Every requirement mapped to a work package, each one sized. A range we can defend line by line.

±50%

Prototype

Something you can use on the real platform before the build is committed. Then re-estimated.

±25%

Build

Agreed scope, stated exclusions, delivered in reviewable increments with monthly effort reporting.

Fixed scope

Discovery, when you need one, is a fixed fee credited in full against the project that follows. Build phases run under a not-to-exceed ceiling you set: work stops for your approval at the ceiling rather than running past it.

On the role of AI

AI compresses the build. Engineers still own the quality.

It would be easy to overclaim here, so plainly: AI-assisted development compresses the build step, which is the part that used to dominate a quote.

It does not compress the senior specification in front of it, or the code review and QA after it. Those are why the result is maintainable, they are done by engineers, and they sit inside the same rate.

Spec
Build — AI-compressed
Review
QA
15%45%15%25%

Typical effort split of a custom build. The cyan block is where the time goes away; the rest is the human quality floor.

In the field

What this looks like in practice

One healthcare monitoring service running on the platform today, and one platform build by our team.

Medical equipment distributor · monitoring service

A distributor that monitors its clients' pharmacies, labs and cleanrooms

A medical equipment distributor in Latin America runs monitoring as a service for the institutions it supplies: a high-complexity clinic, a diagnostic imaging network, a calibration lab and a device manufacturer.

227devices
5organisations on one account

Sensors watch fridges, freezers, platelet agitators and transport coolers, differential pressure in a compounding pharmacy and the medical air plant. Alerts go straight to each institution's staff, and scheduled reports carry each sensor's calibration data.

Built and run by the distributor on the Ubidots platform since 2023, under its own brand. Not a build by our development team.

Equipment manufacturer · white-label platform

An indoor air quality manufacturer building its own platform

They arrived with a finished requirements document and one real question: not "can you build this", but "how much of this do we have to build at all?"

220requirements classified
89.5%deliverable on the platform
~25work packages

145 requirements ship through configuration and 52 through the extension layer. A working prototype was built on the real platform, not in a design tool, and became a delivery asset in its own right.

Enterprise white-label licence closed August 2026 · delivery under way

FAQ

Questions healthcare teams ask first

What does IoT in healthcare monitor?

In this kind of project, the things a hospital, pharmacy or lab depends on to work safely: the temperature of medicines, vaccines and blood products, pressure and humidity in cleanrooms and operating rooms, medical gas plants and tanks, and the status of equipment. Custom software fits that to your areas, your equipment and the records your teams keep.

Does it monitor patients or store patient data?

No. These applications monitor equipment and environments, not people. They are not medical devices, and they are designed to hold no patient health information — readings are tied to fridges, rooms and plant equipment, never to patients.

Does it make us compliant for health inspections?

No software does that on its own. The platform keeps timestamped readings, excursion alerts, who acknowledged them and each sensor's calibration data — records your team can show an inspector. Whether you're compliant depends on your processes and validation, not on the software.

Why is building on Ubidots faster than building from scratch?

Because the work starts at your data model and your interface, not at an empty repository. Ingestion, time-series storage, authentication, roles, alerting and reporting already exist and are in production. AI-assisted development then compresses the build step itself, while specification, code review and QA stay with senior engineers.

Can a medical equipment company offer it as a service under its own brand?

Yes. Each hospital, clinic or lab gets its own organisation, users and roles, alerts go straight to its staff, and the application carries your brand on the web and on mobile. Your team sees every client; each client sees only its own areas.

Who maintains the software after it is delivered?

The infrastructure underneath your application — ingestion, storage, orchestration, security, availability and upgrades — is run and maintained by Ubidots under your platform subscription. You own the application layer. Changes to it after delivery are scoped as new work, the same way the original build was.

Do we own the code?

On engagements where a custom application is the deliverable, the code is written as work for hire: you own the repository and the source, with access throughout the build rather than at the end. The platform underneath stays Ubidots'.

How much does custom healthcare software cost?

It depends on scope, and an honest first answer is a range rather than a number. We give that range on the first call, then narrow it at each stage: specification, work-package estimate, and a prototype you can use before the full build is committed. Discovery, when you need one, is a fixed fee credited against the project.

Do we need a Ubidots subscription?

Yes. The application runs on the Ubidots platform, and the subscription is scoped and quoted separately from the development work. Development is not part of a subscription, and a subscription is not part of a development engagement.

Start with one message

Tell us what your teams need to keep an eye on

Tell us what you need. We'll get back to you to work out whether there's a project here, and put a range on it that's honest about how wide it still is.

Get in Touch

Get in Touch

Get the best of our product and team

Main IoT verticals (select up to 3)